How to Put a Jolly Jumper Together: A DIY Guide to Putting Together a Jolly Jumper

Oh my goodness parents!! Have you ever put together a Jolly Jumper? It’s so much fun! Anyways, you’re going to need all of the pieces before beginning assembly. The directions are easy to follow, I promise!

Jolly Jumps are small trampolines that can be attached to a door frame or used without a door Frame.

There’s an easy and fun way to exercise your baby – Jolly Jumping! It’s a great way to get your little one moving and burning off energy. 

A Jolly Jumper is the perfect toy for your active child!

If you are new to putting a Jolly Jumper together, this guide will help you get started.

Learn how to set up your Jolly Jumper in minutes!

Bang on…

Get ready to know how the process needs to assemble a Jolly Jumper step-by-step.

how to put jolly jumper stand together

DIY Guide to Putting Together: How to Assemble a Jolly Jumper

A jolly jumper is a toy that is designed to help babies learn to jump!

Got a Jolly Jumper but don’t know how to assemble it? Assembly of a Jolly Jumper is super easy.

In Jolly Jumper both the bar and seat are connected with elastic bands. So, your baby can jump up and down on the seat and make the bar swing back and forth!

Make sure to only use swings from safe, time-tested manufacturers for your little one!

You may need to be careful when assembling a Jolly Jumper!


Incorrectly putting it together can be dangerous for your child!


Let me tell you how to put together this amazing jolly jumper!

There are different pieces that go into it, and I’ll show you how to put them all together.

So your baby can have hours of jumping fun!…

Read on…

Parts of a Jolly Jumper: List for Fitting

Before you learn to assemble a Jolly Jumper, you need to know about the different parts of it. Above all, you will need to gather the following list of the parts__

  • Cross Bar A with a hook attached to it.
  • Cross Bar B without a hook.
  • Cross Bar resting plate.
  • Top knob
  • 4 mid legs
  • Spring with swivel attachment and safety cord
  • Saddle with spreader bar

Putting a Jolly Jumper All Together

I know how exciting it can be to put together your very own Jolly Jumper! Even if you have never done it before, don’t worry!….


Let’s do this!

Once you have all of the supplies, you can begin assembling the jumper. Just follow the steps bellow__

Step 1. Hook Cross Bar: Attach the Cross Bar Resting Plate on the crossbar A using the appropriate hooks. It is important that the groove on the underside of the plate is aligned correctly with the bar underneath.

Step 2. Place Cross Bar B: It is important that Cross Bar B be placed in such a way that it is perpendicular to the upper side of the Cross Bar Resting Plate. After that, securely tighten the Top Knob to keep the components in their proper positions.

Step 3. Connect legs: Establish a connection between the crossbar frame and the four Mid Legs. The threaded ends of each leg are screwed together to form the overall assembly of the legs. Join four Base Legs to four Mid Legs to complete the structure.

Step 4. Connect spring and Saddle: At this point, you should connect the Spring to the hook that is attached to the Cross Bar A. Now It is ready to use. Place your bub on the Saddle and hang it to the spring.

If you’re looking for a fun, easy way to cool off this summer, a Jolly Jumper is perfect!

These inflatable jumpsuits are available in a variety of colors and styles, so there’s sure to be one that fits your personality. It is important to follow our easy guide to putting one together yourself. And follow our instructions carefully to ensure that your jumper is safe for your baby. Make sure you have all the supplies before you begin assembly.

Hey, parents! If you want to learn how to take apart your Jolly jumper, so you can save your infant and keep them safe at home, we’ve got the instructions right here!

How to put your Baby into the Jolly Jumper?

As you have learned to assemble a Jolly Jumper, now you can place your baby in it. But before that, you need to know the exact process of putting your baby in the saddle. Follow the instruction to correctly put your bub in it.

  1. Place the saddle and spreader bar on a flat surface and then insert your baby into the Jolly Jumper. Verify that the cords are straight and untwisted. The webbing that connects the saddle to the spreader bar should be long enough for the baby’s arms to fit between.
  2. Place the baby in the saddle with his or her clothes off, as if he or she were wearing a diaper. Make sure the spreader bar is attached to the saddle (exterior diaper).
  3. Now place the lower part of the saddle between the baby’s legs and buckle it in place. Fit the saddle on the baby in the same way that you would a diaper on the infant.
  4. Secure the waistband with Velcro and a buckle. Allow at least an inch of space under the baby’s arms.
  5. Carry the baby to the spring and secure the spreader bar to the spring’s lower swivel hook using the spreader bar as a means of support.
  6. Chain links can be used to adjust the height of the Jolly Jumper. The soles of your baby’s feet should be on the ground, with the heel and the ball of the foot elevated.

OMG! if you want to know more details about how to put your baby into the jolly jumper then go there now!

So now it’s all up to your infant. The gentle up-and-down floating motion that has made Jolly Jumper the world’s leading baby exerciser is activated by even the smallest baby kick or movement. In order for the baby to move freely, it has a swivel base.

Warnings of using a Jolly Jumper

You might think that a Jolly Jumper is a relatively harmless way to give your baby a little something to do and to keep him/her happy for a short time. However, as with almost all baby products, it is important to make sure you are using it correctly. Using a Jolly Jumper comes with a number of safety precautions. If you pay attention to them, you can avoid accidents.

  • Secure all snaps, Velcro, and fasteners on the Jolly Jumper’s spreader bar before using.
  • Keep older children away from the area, when in use
  • Avoid promoting jerky, dizzying movements.
  • Never use as a Hurl.
  • Don’t ever leave the kid unsupervised.
  • Never use until baby can hold head up with full neck support.

Final Verdict

We just walked you through the basics of putting together a jolly jumper!

A Jolly Jumper is a great toy for children that helps with development of balance, coordination, and movement. A Jolly Jumper is a great way to keep your baby entertained. They can jump and play in it, and it’s a good way to help them develop their motor skills.

Putting together a Jolly Jumper can be a little challenging, but with this guide you should be able to do it without any problems.

If you’re like me, you love DIY projects. So I’m sure you enjoyed putting your baby’s jolly jumper back together again!

Anyway, if you have any questions or concerns, please feel free to leave a comment.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll to Top